Job Description

The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.

Principal Accountabilities

• Determine test method and prepare fluids and parts for nondestructive inspection.
• Interpret nondestructive inspection test results and provide information about defects to repair center.
• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.
• Establish radiation areas for radiographic operations.
• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.
• Perform nondestructive inspection on structures, components, and systems.
• Detect flaws such as cracks, delamination’s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.
• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.
• Operate, maintain, and inspect nondestructive equipment.
• Perform operator maintenance and service inspections on shop equipment and tools.
• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.
• Perform silver recovery functions.
• Handle and dispose of hazardous waste and materials.
• Perform other qualified duties as assigned

Minimum Requirements

• Completion of high school or equivalent.
• U.S. military technical school or specialized training course is desired, certification of education level is required.
• Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.
• Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned Mission Design Series (MDS) airframe. (UH60, AH64, CH47)
• Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned
• Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.
• Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.
• Must be a US citizen.
• Ability to obtain/maintain Clearance (Public Trust NAC-I)
• Able to clear CENTCOM MOD15 Medical for deployment.

Preferred Qualifications

Knowledge & Skills

• Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.
• Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.
• Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.
• Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.
• Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.
• Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.
• Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.
• Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.
• Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.
• Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
• Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• Ability to provide technical support to structural/mechanical engineers and customers.
• Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.

Physical Requirements/Working Environment

• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day
• Must be able to climb stairs, ramps, ladders, and work stands
• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders
• May be required to lift heavy objects whose weight may exceed 50 pounds
• Must be able to type using a standard keyboard to communicate through e-mail and various software applications
• Will handle dirty parts and lubricants
• Will be required to wear proper Personal Protective Equipment (PPE)
• Must be able to pass a Respirator Physical and Fit Test qualification
• May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.
• Must be able to lift/push/pull minimum of 50 pounds
• May work in maintenance shop or outside
• Must be able to work in a shop where the environment is drafty, noisy, and dirty
• May be exposed to extreme noise from operating equipment
• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.

Skills Required

• Aerospace
• NDT